Concrete Calculator
Estimate concrete for slabs, footings, columns and tubes. Free, instant, no signup.
Use this free concrete calculator to estimate cubic yards and 60-lb or 80-lb bags for slabs, footings, columns, tubes, driveways, patios, and sidewalks. Enter the length, width, and thickness; the calculator converts the dimensions into cubic feet, cubic yards, and approximate bag quantities.
Cubic yards
1.23
33.33 ft³ · 0.94 m³
60 lb bags
73
Quikrete or similar
80 lb bags
57
Quikrete or similar
Save this project
Sign in to save calculations to your dashboard.
Download your PDF report & project guide
Your results and inputs, a printable shopping list, a step-by-step guide and pro tips — in one PDF.
Planning a whole project?
Get every calculator, a full shopping list and a budget template for:
Recommended tools & materials
Handy picks for this project on Amazon.
Quikrete Concrete Mix (80 lb)
Standard high-strength bagged mix
View on Amazon →
Concrete Mixing Tub
Mix bags by hand without a mixer
View on Amazon →
Magnesium Bull Float
Smooth and level fresh slabs
View on Amazon →
Concrete Edger & Groover Set
Clean edges and control joints
View on Amazon →
As an Amazon Associate, MaterialCalc earns from qualifying purchases.
How does the concrete calculator work?
Concrete volume is length × width × thickness. Convert thickness from inches to feet by dividing by 12, then divide the resulting cubic feet by 27 to get cubic yards.
Formula: yd³ = (L ft × W ft × T in ÷ 12) ÷ 27
A 60 lb bag of pre-mix yields about 0.017 yd³ (0.45 ft³); an 80 lb bag yields about 0.022 yd³ (0.60 ft³). Ready-mix trucks typically start at 1 yd³ minimum.
What do people use the concrete calculator for?
Concrete for a Slab
Estimate cubic yards and bags of concrete for any slab pour.
Concrete for Footings
Estimate cubic yards and bags for footings, piers and trench pours.
Concrete for a Driveway
Estimate cubic yards of concrete for any driveway pour.
Concrete for a Patio
Estimate cubic yards and bags for a poured concrete patio.
Concrete for a Sidewalk
Estimate cubic yards and bags for a sidewalk or concrete walkway.
What else do people ask about this calculator?
How much concrete do I need for a 10×10 slab?
A 10×10 ft slab at 4 in thick needs about 1.23 cubic yards (33 ft³) — roughly 56 bags of 80 lb pre-mix or 74 bags of 60 lb pre-mix.
How thick should a concrete slab be?
A 4 in slab is standard for patios and walkways. Driveways use 4–6 in, and garage floors usually 4 in over compacted base.
How many 80 lb bags of concrete in a yard?
About 45 bags of 80 lb pre-mix make one cubic yard. For 60 lb bags, it takes about 60 bags per yard.
Should I add waste to my concrete estimate?
Yes — add 5–10% to account for spillage and uneven subgrade. This calculator returns the raw volume; round up when ordering.
Which related calculators should I use next?
Where can I learn more about these materials?
Weights, coverage, types and buying tips for the materials this calculator estimates.
Sand guide
Choose the right sand for pavers, mortar, or bedding and estimate the load accurately.
Concrete guide
Learn how many cubic yards you need, which PSI rating to specify, and how to order the right concrete mix.
Crushed Stone guide
Crushed stone sizes suit different applications: #57 stone is commonly used for drainage, concrete, and paver bases; #8 stone works for fine paver bedding, chip seal, and decorative applications; and ¾″ minus, also called crusher run, compacts into a hard driveway base.
Limestone guide
Crushed limestone for base, drainage, and agricultural use.
All calculators
Complete Your Concrete Project
These practical tools help you mix, finish, and shape your concrete project.
Argee Mixing Tub
Search on Amazon →
Marshalltown Concrete Edger
Search on Amazon →
Marshalltown Concrete Groover
Search on Amazon →
Paid links: as an Amazon Associate, MaterialCalc earns from qualifying purchases.