Gravel Calculator for a Walkway
Estimate gravel for a garden walkway or path.
The gravel calculator estimates volume first, then converts it to tons. Multiply the area by the depth (converted to feet) to get cubic feet, divide by 27 to get cubic yards, and multiply by ~1.4 to get tons.
Cubic yards
1.85
50 ft³
Tons
2.59
~1.4 tons per yd³
Area
200
square feet
Save this project
Sign in to save calculations to your dashboard.
Download your PDF report & project guide
Your results and inputs, a printable shopping list, a step-by-step guide and pro tips — in one PDF.
Planning a whole project?
Get every calculator, a full shopping list and a budget template for:
Recommended tools & materials
Handy picks for this project on Amazon.
Landscape Fabric
Stops weeds under gravel and mulch
View on Amazon →
Steel Garden Rake
Spread gravel, soil and mulch evenly
View on Amazon →
Heavy-Duty Wheelbarrow
Move bulk material fast
View on Amazon →
Hand Tamper
Compact base layers before paving
View on Amazon →
As an Amazon Associate, MaterialCalc earns from qualifying purchases.
How does the gravel calculator work?
Gravel is estimated by volume, then converted to tons. Multiply the area by the depth (converted to feet) to get cubic feet, divide by 27 for cubic yards, and multiply by ~1.4 for tons.
Formula: tons = (L × W × D/12 ÷ 27) × 1.4
What else do people ask about this calculator?
How deep should gravel be on a walkway?
2–3 in of surface gravel over a 2 in compacted base is enough for foot traffic. Any deeper and walking becomes unstable — the gravel shifts under each step.
Pea gravel or crushed stone for a walkway?
Pea gravel feels softer and looks decorative but shifts underfoot. ¼ in angular crushed stone packs tight and stays put — better for wheelbarrows, strollers or accessibility.
How much gravel do I need for a driveway?
A typical residential driveway uses 4–6 in of gravel. For a 20×10 ft driveway at 4 in, you need about 2.5 yd³ (3.5 tons).
How many tons of gravel in a cubic yard?
About 1.4 tons per cubic yard for average crushed stone. Denser stone (river rock) can be 1.5+ tons/yd³.
How deep should gravel be for drainage?
3–4 in for a top layer; 6+ in for a base beneath pavers or concrete.
Which related calculators should I use next?
Where can I learn more about these materials?
Weights, coverage, types and buying tips for the materials this calculator estimates.
Gravel guide
How much gravel you need, what a cubic yard weighs, and which type fits your project.
Asphalt guide
Weight
Crushed Stone guide
Crushed stone sizes suit different applications: #57 stone is commonly used for drainage, concrete, and paver bases; #8 stone works for fine paver bedding, chip seal, and decorative applications; and ¾″ minus, also called crusher run, compacts into a hard driveway base.
Pea Gravel guide
Pea gravel is smooth, rounded ⅜″ stone commonly used for patios, paths, play areas, dog runs, and drainage. One cubic yard weighs about 2,700–2,800 lb and covers approximately 100 sq ft at a 3″ depth. For walkable surfaces, use a 2–3″ layer and edging to keep the gravel contained.
Limestone guide
Crushed limestone for base, drainage, and agricultural use.
All calculators