Gravel Calculator for a Driveway
Estimate tons and cubic yards of gravel for any driveway.
Use this free gravel calculator to estimate how much gravel you need based on area and depth. It calculates volume in cubic yards and converts it to approximate tons using an average weight of 1.4 tons per cubic yard. Enter the length, width, and depth to estimate material for your project.
Cubic yards
1.85
50 ft³
Tons
2.59
~1.4 tons per yd³
Area
200
square feet
Save this project
Sign in to save calculations to your dashboard.
Download your PDF report & project guide
Your results and inputs, a printable shopping list, a step-by-step guide and pro tips — in one PDF.
Planning a whole project?
Get every calculator, a full shopping list and a budget template for:
Recommended tools & materials
Handy picks for this project on Amazon.
Landscape Fabric
Stops weeds under gravel and mulch
View on Amazon →
Steel Garden Rake
Spread gravel, soil and mulch evenly
View on Amazon →
Heavy-Duty Wheelbarrow
Move bulk material fast
View on Amazon →
Hand Tamper
Compact base layers before paving
View on Amazon →
As an Amazon Associate, MaterialCalc earns from qualifying purchases.
How does the gravel calculator work?
Gravel is estimated by volume, then converted to tons. Multiply the area by the depth (converted to feet) to get cubic feet, divide by 27 for cubic yards, and multiply by ~1.4 for tons.
Formula: tons = (L × W × D/12 ÷ 27) × 1.4
What else do people ask about this calculator?
How deep should gravel be for a driveway?
A well-built gravel driveway has 6–8 in of total gravel: a 3–4 in base of large angular stone (#3 or #57) and a 2–3 in surface layer of dense-grade fines (#411) that packs into a hard surface.
How many tons of gravel for a 100 ft driveway?
A 100 ft × 10 ft driveway at 4 in deep needs about 18 tons of gravel. At 6 in deep it's about 27 tons. Order 5–10% extra for compaction and edge losses.
How much gravel do I need for a driveway?
A typical residential driveway uses 4–6 in of gravel. For a 20×10 ft driveway at 4 in, you need about 2.5 yd³ (3.5 tons).
How many tons of gravel in a cubic yard?
About 1.4 tons per cubic yard for average crushed stone. Denser stone (river rock) can be 1.5+ tons/yd³.
How deep should gravel be for drainage?
3–4 in for a top layer; 6+ in for a base beneath pavers or concrete.
Which related calculators should I use next?
Where can I learn more about these materials?
Weights, coverage, types and buying tips for the materials this calculator estimates.
Gravel guide
How much gravel you need, what a cubic yard weighs, and which type fits your project.
Asphalt guide
Weight
Crushed Stone guide
Crushed stone sizes suit different applications: #57 stone is commonly used for drainage, concrete, and paver bases; #8 stone works for fine paver bedding, chip seal, and decorative applications; and ¾″ minus, also called crusher run, compacts into a hard driveway base.
Pea Gravel guide
Pea gravel is smooth, rounded ⅜″ stone commonly used for patios, paths, play areas, dog runs, and drainage. One cubic yard weighs about 2,700–2,800 lb and covers approximately 100 sq ft at a 3″ depth. For walkable surfaces, use a 2–3″ layer and edging to keep the gravel contained.
Limestone guide
Crushed limestone for base, drainage, and agricultural use.
All calculators